Wanin USA PV 380 Specifications download pdf (Page 26)

Outdoor Router P-380 Users Guide

Host Name is the name under which the device will appear for example in the AP Search tool.

DNS Server Address is the IP address of a domain name server. This IP address, provided by your

ISP, will be assigned to all PCs requesting address information through DHCP from the P-380.

Available in AP router mode only!

If you are not sure about the IP address of the DNS server currently responsible for your

local network, please get your IP configuration with “ipconfig” (Win 2000, Win NT and

Win XP) or “winipcfg” (Win 9x and Win Me) from the command prompt.

System Identification is a more specific device name for better identification by service staff.

Address is the street and postal address of the location where the device is deployed.

Coordinates specifies the longitude and latitude or other coordinates of the device location.

Customer name is the customer’s name

Please note: All of the parameters above on the general configuration setting page are

required!

6.4.3 Network Configuration Settings

On the network configuration settings page you can modify the IP settings for the P-380 and the

default gateway.

WAN Interface Settings

Figure 20 – Network configuration settings: WAN interface

Interface: Use this option to switch the WAN interface of P-380 on (Enable) or off (Disable).

Available in AP router and client router mode only!

Note: In AP router mode you disable the wired interface to the Ethernet using this radio

button. When the interface is disabled, there are no connections possible between

Ethernet devices and the P-380(see Comparison of the Operating Modes).

In client router mode you disable wireless interface using this radio button. When the

interface is disabled, there are no connections possible between wireless devices and

the P-380 (see Comparison of the Operating Modes).

IP Address assigned by ISP is the device’s IP address on the WAN interface. If the DHCP client

function is enabled, the IP address assigned by the DHCP server will be used. If no DHCP server can

be found via WAN interface, the IP entered here will be used.

Gemtek Systems Page 26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 66 67

No comments

Wanin USA PV 380 Specifications Page 26